ACCOSSATO CNC brake caliper (40mm; axial mount)
ACCOSSATO CNC brake caliper (40mm; axial mount)
SKU:
Product numer: PZ013N-SX-OR
Product numer: PZ013N-SX-ST
Product numer: PZ013N-SX-ZXC
Product numer: PZ013H-SX-OR
Product numer: PZ013H-SX-ST
Product numer: PZ013H-SX-ZXC
Product numer: PZ013K-SX-OR
Product numer: PZ013K-SX-ST
Product numer: PZ013K-SX-ZXC
Product numer: PZ013N-DX-OR
Product numer: PZ013N-DX-ST
Product numer: PZ013N-DX-ZXC
Product numer: PZ013H-DX-OR
Product numer: PZ013H-DX-ST
Product numer: PZ013H-DX-ZXC
Product numer: PZ013K-DX-OR
Product numer: PZ013K-DX-ST
Product numer: PZ013K-DX-ZXC
DESIGNED AND MANUFACTURED BY ACCOSSATO FOR VARIOUS MAKES AND MODELS WITH COMPATIBLE BRAKE CALIPER BRACKETS AND SUPPORT COMPONENTS
Equivalent part number from other manufacturers: none
Attention:
● May not be compatible with some vehicles due to differences in design, rim size, or caliper mounting positions.
● It is advisable to have prior experience for the setup and installation of the product.
Product code identification:
1/ Capiler placemet:
+ Right side mount: PZ013_-SX-_
+ Left side mount: PZ013_-DX-_
2/ Capiler colour:
+ Black: PZ013N-_-_
+ Grey: PZ013H-_-_
+ Nickel plated: PZ013K-_-_
3/ Included pad material:
+ Organic: PZ013_-_-OR
+ Sintered: PZ013_-_-ST
+ Ceramic: PZ013_-_-ZXC
Replacement and optional parts (sold individually as single item)
● ACCOSATO sealing washers
1/ Replacement or the brake caliper
a/ Upper pistons:
+ 34mm piston: PA034
+ Piston seal: UP034
+ Piston dust seal: GP034
b/ Lower pistons:
+ 29.5 mm piston: PA295
+ Piston seal: UP295
+ Piston dust seal: GP295
● Brake pads:
+ AGPA96OR (organic)
+ AGPA96ST (sinter)
+ AGPA962ZXC (ceramic)
+ AGPA96EV1 (EV1)
+ AGPA96EV2 (EV2)
Product detail:
● Material: Billet aluminum alloy
● Recommend brake fluid: DOT 4
● Type: 4 opposed pistons
● Mounting type: Axial*
● Piston diameter:
+ Upper: 34mm
+ Lower: 29.5mm
● Mounting pitch: 40mm
● Caliper offset: 26.5mm
● Banjo bolt thread: M10x1.0
● Brake pad type: (as listed above)
● Recommended tightening torque:
+ Banjo bolt: 20-23Nm (use new sealing washers)
+ Air bleed screw: 8-10Nm
(*): The brake bolt and the wheel axle axis is parallel to each other.
*The information was translated by the Sagobi Team. Please ensure that the source is appropriately acknowledged when using or reproducing this content.
Share
